Muhammad Fahad Shamim Akhtar

Photo

I&C Engineer
Location: Abu Dhabi

Muhammad Fahad Shamim
Address:

P One Camp Adnoc Housing, Room No A-41, Ruwais, Abu Dhabi, UAE.

SD House 138, Lane 5, D.O.H.S Phase 2, Malir Cantt, Karachi, Pakistan.

CAREER SUMMARY

Having 10 years of experience in oil and gas secrtor in instrumentation including Fire And Gas

Currently Serving at ADNOC Refinery RRW Abu Dhabi as F&G Supervisor for almost 3 Years.
Previously having 7 years of Experience in Oil & Gas Sector as Instrument Engineer at Pakistan Petroleum.
Comprehensive knowledge of Various fire alarm systems and Smoke Detection, Linear Heat and Gas Detection Systems,

Fire Suppression and Extinguishing Agent/Sprinklers & Water Spray Systems
Comprehensive knowledge of engineering techniques and instrumentationdesigning.
Possess strong technical aptitude including applicable engineering tools and systems.
Possess strong leadership and Interpersonal skills.
Effective communicator with outstanding management and organizational skills.

SKILLS
Experience in Fire & Gas and E.S.D. Systems within the onshore Oil & Gas Industry.
JMC (Joint Metering Calibration & Gas chromatography) with SSGCL. Verifications of all three transmitters(static pressure,

differential & temperature) of every meter run, verification of GC(Gas Chromatograph), H2S analyzer, Hydrocarbon Dew point analyzer, Barton chart, Inspection of Senior orifice plate and its online configuration by ROCKLINK software, alarm &event reports verification from Floboss and Gas Chromatography unit by using MOON500 software.
Overhauling of Gas Chromatographer Daniel S600 it Bridge Balancing, Baseline Purging & Calibration Procedures.
ATA coordinator for 4 Years with operation, cross-discipline and other concerned personnel.

CURRENT JOB & RESPONSIBILITIES

Currently Working in ADNOC Ruwais Refinery West (RRW) as F&G Supervisor under the contract of Control
& Applications Emirates. My job responsibilities are as follows,
Managing activities & resources of Fire & Gas Maintenance team for maintenance purposes
• Handling preventive maintenance of Fire & Gas and associated equipment malfunctions i.e Gas Detectors, LHD,HSSD, Inergen System, MSIR, Deluge Systems and manufacturers’ recommended maintenance schedules

• Preparing detailed equipment check lists for each maintenance cycle and the estimated man-hour and skillrequirements
• Handling preventive & corrective maintenance programs and activities. Liaising with operations, technical services and other maintenance units for major shutdowns and turn-around activities
• Reviewing cause and effect diagrams, functional logic diagrams, and design package for modifications for reliability Improvements and the execution of plan as required
• Preparing the Method Statement for Fire & Gas detectors Logic test.
• Working with commissioning teams for the installation of new Fire & Gas system, and issuing certificates ofcompletions
• Coordinate Site Acceptance Testing of all Fire & Gas detectors.
• Coordinate with Sub -Contractor for pre commissioning Loop checking activities of all Fire & Gas system.
• Perform the functional test / ESD logic test as per Cause & Effect.

EMPLOYMENT HISTORY
Worked at Italtec Energy (Pvt.) Ltd. (Hala Gas Processing Plant) as an E&I Engineer. Out Sourced by Pakistan Petroleum Ltd. Tando Adam District Sanghar (5th November-2012 to 30th November 2018) my job responsibilities were as follows,

Manage and supervise the Electrical and Instruments activities at the site on a day-to-day basis and responsible for the Electrical activity as per plan and schedule.
Calibration of control valves, PTFL transmitters, I2P converter (Transducer), Gas Chromatography unit DANIAL 700 (Emerson), H2S analyzer &Total Sulphur analyzer (Event & Delmar).
Hydrocarbon Dew Point and Water Dew Point analyzer (CONDUMUX-II).
Mentainence, Installation and Troubleshooting of F&G system including Fire Eye and LEL H2s detectors.
Ensuring engineering procedures and standards for instruments to be implemented in daily plant activities, like PTW,

JSA, confined space etc.
Manage Instrument and Control sections resources (spares) and activities to ensure deliveries are met according to

agreed targets in a professional, responsible and cost effective manner.
Installation and testing of earth pit.
Maintain record of newly developed and installed component.
Will execute jobs through guidance and technical advice of E&I Lead Engineer ensuring conformity to client and

Company’s regulation with ITT HSE Manual.
Will be responsible for execution of all routine, preventive, predictive and shutdown work of E & I in compliance with

HSE procedures.
Responsible to draw spares, consumables, E & I tools for maintenance of instruments & Electrical Installations.
Responsible for technical evolution of vendors’ offers and quotations.

Worked at Taimur Industrial Electronics (Pvt.) Ltd. as Production Engineer (12th January-2012 to 2nd November 2012) there my job responsibilities were as follows,
Plan and coordinate production engineering processes on daily basis to produce high quality products.
Develop process improvements to effectively utilize equipment and materials to maximizeproduction.
Develop operational strategies to achieve production and financial objectives.
Identify unsafe operations and practices and report the same to Manager immediately.
Establish safety procedures and environmental regulations for employees.
Provide engineering support for production and maintenance activities to ensure maximum production.
Evaluate current production activities and make recommendations for improvements.

Internship at Pakistan Petroleum Ltd from 4th January 2011 to 6th February 2011. ACADEMIC CREDENTIAlS

B.E Electronics from Usman Institute of Technology (2007-2012).
HSSC Pre Engineering from DHA Degree College for Men (2005-2007).
FSC from St Paul’s English High School with Biology (2005).

TRAINING
Permit to Work training (PTW) for PERFORMING AUTHORITY (PA).
Work management System (WMS) training for PERFORMING AUTHORITY (PA).

HSE AWARENES
H2S Training.
First Aid Training.
Special training to use BA (Breathing Apparatus) Training.
Fire Fighting Equipment Training.
Training Course of CPR (Cardio Pulmonary Resuscitation) Training.
Training of Behavior Based Safety (BBS).
PERSONAL DOSSIER

Father’s Name : Date of Birth : Nationality : Religion Islam : Languages : Marital Status :

REFERENCES
Muhammad Shamim Akhtar 21st June 1987
Pakistani
Islam

Urdu .English Single
Will be furnished upon request.

Note: All the academic documents (already been verified by Ministry Of Foreign Education and Gerry’s) can be provided if required.

Education

1994 to 2004

Matric at St Pauls English High School

2007

Intermediate at DHA Degree College For Men

2011

B.E Electronics at Usman Institute Of Technology

Experience

Present

Fire and Gas Supervisor at Control and Application Emirates

Currently Working in ADNOC Ruwais Refinery West (RRW) as F&G Supervisor under the contract of Control
& Applications Emirates. My job responsibilities are as follows,
Managing activities & resources of Fire & Gas Maintenance team for maintenance purposes
• Handling preventive maintenance of Fire & Gas and associated equipment malfunctions i.e Gas Detectors, LHD,HSSD, Inergen System, MSIR, Deluge Systems and manufacturers’ recommended maintenance schedules
• Preparing detailed equipment check lists for each maintenance cycle and the estimated man-hour and skillrequirements
• Handling preventive & corrective maintenance programs and activities. Liaising with operations, technical services and other maintenance units for major shutdowns and turn-around activities
• Reviewing cause and effect diagrams, functional logic diagrams, and design package for modifications for reliability Improvements and the execution of plan as required
• Preparing the Method Statement for Fire & Gas detectors Logic test.
• Working with commissioning teams for the installation of new Fire & Gas system, and issuing certificates ofcompletions
• Coordinate Site Acceptance Testing of all Fire & Gas detectors.
• Coordinate with Sub -Contractor for pre commissioning Loop checking activities of all Fire & Gas system.
• Perform the functional test / ESD logic test as per Cause & Effect.

2018

E&I Engineer at Italtec Energy Pvt Ltd

Worked at Italtec Energy (Pvt.) Ltd. (Hala Gas Processing Plant) as an E&I Engineer. Out Sourced by Pakistan Petroleum Ltd. Tando Adam District Sanghar (5th November-2012 to 30th November 2018) my job responsibilities were as follows,
• Manage and supervise the Electrical and Instruments activities at the site on a day-to-day basis and responsible for the Electrical activity as per plan and schedule.
• Calibration of control valves, PTFL transmitters, I2P converter (Transducer), Gas Chromatography unit DANIAL 700 (Emerson), H2S analyzer &Total Sulphur analyzer (Event & Delmar).
• Hydrocarbon Dew Point and Water Dew Point analyzer (CONDUMUX-II).
• Mentainence, Installation and Troubleshooting of F&G system including Fire Eye and LEL H2s detectors.
• Ensuring engineering procedures and standards for instruments to be implemented in daily plant activities, like PTW,
JSA, confined space etc.
• Manage Instrument and Control sections resources (spares) and activities to ensure deliveries are met according to
agreed targets in a professional, responsible and cost effective manner.
• Installation and testing of earth pit.
• Maintain record of newly developed and installed component.
• Will execute jobs through guidance and technical advice of E&I Lead Engineer ensuring conformity to client and
Company’s regulation with ITT HSE Manual.
• Will be responsible for execution of all routine, preventive, predictive and shutdown work of E & I in compliance with
HSE procedures.
• Responsible to draw spares, consumables, E & I tools for maintenance of instruments & Electrical Installations.
• Responsible for technical evolution of vendors’ offers and quotations.

  • Engineering
  • Updated 12 months ago

Only Employers can view Contact Details. Request Access