Randy Amboya

RANDY DE CHAVEZ AMBOYA

Street 855, Zone 35, Fereej Kulaib, Doha, Qatar

Mobile No: +974 3079 4023, +974 3167 8653

E-mail address: [email protected]

OBJECTIVE

A challenging position in an organization where my technical and analytical skills would be used for the betterment of the organization.

WORKING EXPERIENCES

PETROTECH – QFAB

DOHA, QATAR

Position: Electrical Technician

April 16,2019 up to March 30, 2023

DUTIES AND RESPONSIBILITIES

• Perform a variety of maintenance duties involved in the repair, installation, operation troubleshooting of the equipment on building, facilities & yard.
• Responsibilities all electrical installation, repair, replace & troubleshooting of electrical system and  hydraulic system.
• Performed  building and equipment repairs using  hand tools,  power tools, and  basic electric multimeter skills.
• Studied and evaluates blueprints, drawings, schematics and other written technical machinery, documents which would be used as references for troubleshooting procedures
• Check electrical installation, repair, replace & troubleshooting of High voltage and Low voltage, circuit breaker, relay, electronic device, battery charger, magnetic contactor & motor.
• Maintain all records, such as work orders and necessary reports to ensure accurate recording of activities.
• Perform calibration of equipment, load test checking, repairing and troubleshooting of equipment around the yard and facilities.
• Performed maintenance activities in building facilities like maintenance of distribution boards, sub-main distribution boards ,motor control center, generator, repairing & troubleshooting all types of electrical equipment.
• Assist the inspector for the third party inspection of the equipment.
• Conduct pre- delivery inspection of  newly equipment.
• Installed & troubleshooting  GPS of  the machine.
• Operate the equipment in facilities & inside the workshop.
• Possessed working knowledge of computerized preventive maintenance work order system.
• Performs basic troubleshooting, regularly inspects and repair of air conditioning system.
• Performed adjustment, calibration procedures and dismantle, restored & replaced the defective parts.
• Check electrical and other control panels to ensure that are functioning  properly
• Repairing and troubleshooting of tower light, forklift, man-lift, spider lift, and scissor lift.
• Maintain and sustain utility system to include operate, set up, routine maintenance, perform mechanical and electrical diagnostics to troubleshoot and repair abnormal conditions.
• Maintain and assure the proper function of the facility and its Mechanical, Electrical, plumbing and alarm system, including minor malfunctions of any of the components in and around the facility.
• Assist in establishment of routine preventive maintenance program for all physical plants areas and equipment.
• Assist the facilities supervisor in maintaining accurate logs to document daily maintenance activities performed at the facility.
• Determine and report needed supplies parts to supervisor.
• Perform audits, inspects, and evaluates the physical condition of the yard & facilities for operability to determine if repairs are needed and make repairs in a timely manner.
• Responsible for the accuracy, clarity and compliance of all documentation, preventive maintenance task sheets, work orders, and log books
• Analyzes maintenance and repair problems
• Coordinate service with outside vendors as needed

MINISTRY OF INTERIOR

GENERAL DIRECTORATE OF CIVIL DEFENSE

Kingdom of Saudi Arabia,  Jeddah        

Position: Electrical Maintenance Technician

October 05, 2012 up to August 05, 2018

DUTIES AND RESPONSIBILITIES

• Responsible of maintenance duties in the repair, installation, operation troubleshooting and maintenance of buildings and facilities
• Troubleshoots and performs major and minor electrical maintenance to include but not limited to replacement or repair of fixtures including wall switches and outlets, fluorescent lighting fixtures, tubes, ballast, socket, fuses, circuit breaker, smoke detectors, air conditioning system, and extension cords using appropriate hand, power and specialty tools
• Installed and inspected motors, electrical circuit, electronic devices to increase redundant operations.
• Performs maintenance of high voltage and low voltage, circuit breakers, protection relays, charger, busbars, and ups.
• Interpret blueprint s, sketches, layout, wirings diagrams, drawings and specification.
• Assemble, install and maintain wiring, equipment, apparatus, fixtures and appliances using appropriate tools and methods.
• Used voltage tester, ammeter and replaced circuit breakers and panels.
• Inspected faulty hydraulic mechanical and pneumatic components of equipment and machine.
• Advance knowledge of industrial electricity, including single and three-phase power systems

demonstrated ability to write, document and update preventive maintenance procedures and corrective maintenance

• Troubleshoot and repairing pumps, motors and exhaust fan
• demonstrated experience and thorough knowledge of automotive equipment maintenance including electrical systems, Inspect and diagnose diesel, gas, electric automotive, components, and systems to determine necessary repairs.
• Test recondition and replace faulty alternators, starter motors, carburetor, generator, fuel level sending unit, instrument cluster, oil pressure sensor & speed sensor.
• Repaired or replaced faulty ignition, electrical wiring, fuses, relay, switches, winch motor, power window regulator & lighting system accessories.
• Servicing of car air-conditioning system by using refrigerant recovering machine for recharging, leak test, oil charging and purifying.
• Dismantle and restore AC components including compressor, condenser, accumulator or filter drier, blower motor & relay, expansion valve/ orifice valve and evaporator.
• Profound knowledge of basic computer skills upon the troubleshooting of vehicles.
• Analyze malfunctions of automotive equipment, using voltmeter, ammeter, ohmmeter drawings and visual inspection.
• Researched faults using manufacturers’ circuit diagrams and specification manuals.
• Dispensed fuel, checked and refilled fluid levels and changed oil and filters, as necessary
• Removed and replaced batteries, oiled and greased equipment.
• Tested and drove vehicles to assure proper working order, and delivered vehicles for servicing or refueling.
• Explained vehicle electrical problems to customers clearly and accurate
• Ensured that all health and safety legislation and internal procedures are followed.
• Ensuring good housekeeping standards.
• Performed other related duties as assigned.

ASIAN TERMINALS INC.

BATANGAS CONTAINER TERMINALS

Sta. Clara Batangas City

Position: Engineering Technician

December 20, 2010 up to September 05, 2012

DUTIES AND RESPONSIBILITIES

• Primary responsibility is to provide quality installations, inspections, maintenance and repairs of hoist and crane equipment.
• Diagnoses cause of electrical or mechanical malfunction or failure of operational equipment and perform preventive and corrective maintenance
• Responsible for troubleshooting including: inverter, transformer, protection relays, heaters, resistor, busbars, ups battery charger, variable frequency drive, plc, motor, relays, solenoid, magnetic contactor, circuit breaker, limit switch, telephone system and other electrical equipment and components
• Performed testing and operate of quay crane and rubber tired gantry crane
• Carries out basic electrical and  mechanical  troubleshooting of generator
• Carry out daily inspection and checking of crane equipment before vessel operation for loading and unloading of container
• Handling responsibilities of checking and troubleshooting of hydraulic system.
• Recommends or initiates modification or replacement of equipment which fails to meet acceptable operating standards
• Clean, Lubricate, and perform other routine maintenance work on equipment and vehicles
• Responsible to analyze the mechanism of the cranes and correct the malfunctioning.
• Examine the equipment’s and check the positioning of different parts for the accurate alignment with the main device
• Follow recognized procedures, techniques and safety precautions in performance of duties
• Responsible to emergency breakdowns, and repair of equipment
• Participates in the annual inventory of electrical / electronic devices and components on crane equipment
• Responsible for maintaining cleanliness of workshop facilities and all equipment.
• Read and understand operating manuals, blueprints, and technical drawings.
• Carry out fulfilled and accurate daily reports on equipment as needed
• Conduct monthly preventive maintenance and ensure the good condition of electrical and mechanical equipment.

BAYTUR GENERAL CONSTRUCTION CORP.

Doha, Qatar

October 02, 2006 – April 24, 2010

DUTIES AND RESPONSIBILITIES

Position: Electrical Technician

§  Performed preventive maintenance activities related to the installation, operation, troubleshooting and maintenance of electrical system equipment.                                                 

§  Check and monitor engine generator, check oil level, fluids leak, coolant system checks, hoses & bulbs, fuel system, battery check and clean terminals

§  Maintain the electrical lighting & fixtures of room’s facilities

§  Undertakes electrical repairs, including replacing and restoring parts, clean and change defective materials like switches, socket, exhaust fun, air-conditioning unit, fluorescent fixture, circuit breakers, magnetic contactor & relay, cooker, heaters, pump motor, vacuum cleaners, drill machines and related wiring, and accessories

§  Checks and evaluates tools and equipment for repair

§  Responsible for preventive maintenance activities including visual inspections of electrical control room panel

§  Conduct daily reporting of schedule and status of work

§  Fabricate and install control and distribution apparatus, including switches, relays and circuit breaker panels

§  Cut, thread, bind and route conduit lines, and pull wire, through conduit as required

§  Dismantle and repair equipment, replacing defective wires and burned out fuses

§  Test continuity of electrical circuits in installed or repaired equipment, using electrical measuring instruments

§  Surveying building and repair mechanical system, performing maintenance of electrical systems and assisting in the setup of ventilation, refrigeration, and other system.

§  Diagnose, troubleshooting and inspection of fire alarm system

§  Analyze malfunctions of electrical equipment, using ammeter, voltmeter, ohmmeter drawings and visual inspection

§  Perform preventive maintenance activities including periodic inspections, taping frayed or exposed wires and securing loose connections.

§  Read wiring diagrams, schematics, sketches and job specification.

§  Maintain records and service reports of materials and time expended

§  Follow recognized procedures, techniques and safety precautions in performance of duties

§  Participates in inspection, commissioning and testing of newly installed distribution board apparatus.

§  Initiate, recommend, and provide solutions through designated problem.

§  Conducts daily reporting of working status.  

EPSON PRECISION PHILS. INC

Lipa City, Batangas Philippines

September 13, 2002 – Sept. 25, 2006

Position: Technician

• Conducts daily checking of machine and equipment/devices such as sealing machine, conveyor, desktop computer &  (CPU) used in the production area..
• Perform trouble shooting of machines equipment’s and electrical components including: plc, transformers, relay, magnetic contactor, torque driver, and switch panels.

§  Monitor and give countermeasures on downtime problem caused by defective devices and machine.

§  Ensure the completeness set-up of machine and equipment by model of Printer & Scanner as being required before start of production.

§  Participates in the improvement activity concerning the efficiency of equipment to maintain their good function.

§  Checks and evaluates equipment and tools for repair.

§  Conduct monthly preventive maintenance and ensure the good condition of tools and equipment.

§  Carry out line set-up for worktable installation including electrical requirements as needed by production.

§  Control checks the operation and maintains the equipment, which are under the responsibility of the group.

§  Checks and reports unsafe condition in the working area.

§  Perform modification or improvements as required by the group.

§  Report schedule and status of activities to immediate superior.

ON THE JOB TRAINING             

COCOCHEM

          UNITED COCONUT CHEMICALS, INC.

          Engineering Department, Electrical and Instrumentation Section

CAIP, Aplaya Bauan Batangas, Philippines

November up to  March 2001

Position: Industrial Electrician

·        CHEMPHIL ALBRIGHT AND WILSON CORP.

San Pascual, Batangas, Philippines

Jan. 17, 2000 up to April 8, 2000

Position: Maintenance Technician

• BOBCOCK-HITACHI (PHILIPPINES) INC.

San Roque, Bauan Batangas, Philippines

September up  to December 1999

Position: Industrial Electrician

EDUCATION

COLLEGE:              BATANGAS STATE UNIVERSITY

                            BACHELOR OF INDUSTRIAL TECHNOLOGY

                              Major in ELECTRICAL ENGINEERING TECHNOLOGY

                              1998 – 2002

SECONDARY:           Batangas National High School

1993 – 1997

PRIMARY:              Banaba South Elementary School

                              1987 – 1993

SPECIAL SKILLS

§  Computer literate, proficiency in Microsoft Office (Excel, Word, and Power Point presentation)

§  With perseverance and determination to accomplish task.

§  With confidence and dedication to my job.

TRAININGS / SEMINARS ATTENDED

QFAB

Doha, Qatar

September 07, 2021

EOT CRANE OPERATOR

MINISTRY OF CIVIL DEFENSE

HADDA JEDDAH K.S.A 

November17, 2013 to November 20, 2013

Ø  TEAM 21 DIAGNOSIS, ELECTRICAL A.C Training Course         

EPSON PRECISION PHIL’s INC.

Sepz, Lima Tech. Center

Lipa City Batangas

2002 – 2005

Ø  Electrical Basic and Control Training

Ø  General Safety Orientation

Ø  Basic Handling of Chemical

Ø  ISO 9001: 2000 version awareness training

Ø  Orientation on company rules and regulation

Ø  Work attitude and values

ELIGIBILITY EXAMINATION

Ø  BUILDING WIRING ELECTRICIAN

National Certificate 1^st – 3^rd Class

Ø  June 04, 2001

PERSONAL PROFILE

Born on March 05, 1980 in Banaba South Batangas City Philippine; 43 years of age, married and a Filipino citizen; stands 5’5’’ and weights 140 lbs, can speak Tagalog, English languages and basic Arabic language.

CHARACTER REFFERENCES

Available upon request.