Selvakumar Periyasamy

CURRICULUM VITAE

SELVAKUMAR PERIYASAMY

SUPERVISOR / SR.TECHNICIAN (FIRE & GAS)

Email: [email protected]

+974-50102553 (Qatar)

+91-7339569318 (India)

OBJECTIVE

A challenging carrier to utilize my skills and ability in the Instrumentation Industry that offers professional growth and scope for widening the spectrum of my knowledge

PROFILE SUMMARY

I am having 13 years of professional experience with presently working as a site supervisor having 8 years experience in the field of fire & gas instrumentation system maintenance onshore commissioning / start up and shutdown activities specialized installation, calibration, configuration, troubleshooting, testing and resolving a highly complex instrumentation and control issues. Skilled to read plant layout drawing, as-built cause & effect, loop drawing, instrument cable termination FLD through instrument, marshalling panel.

SKILLS

Leading a team consists of instrument supervisor; senior instrument Technicians for installation, troubleshooting, testing and routine maintenance of fire & gas instrumentation field.

Having good knowledge of plant safety rules & regulations.

Good knowledge about Permit to work systems (PTW).

Familiarity about several kind of Perilous involved in work area and essential safety measure to be done for safe work.

Ability to work under pressure, can handling plant independently weekend, holidays or timeline situation.

Self-motivated, good team worker and always willing to learn, Good communication and interpersonal skills.

Strong team working skills with an ability to motivate others and to lead or manage teams and projects.

Flexibility and ability to compromise and willingness to accept responsibility and make decisions.

ACHIEVEMENTS & APPRECIATION

EHS Certificate of appreciation by Johnson control (TYCO) – Qatar as Top near miss reporter for the FY-2022 awarded in June 2023.

HSE certificate of appreciation by Qatar petroleum for outstanding contribution towards HSE awarded in April-2021 (World Day for Health & safety).

HSE certificate of appreciation by Qatar petroleum for outstanding HSE achievement Best safety observation (SOC) reported in 2nd quarter 2020 awarded in Feb-2021.

HSE certificate of appreciation by Qatar petroleum for outstanding HSE achievement Best safety observation (SOC) reported in Nov-2019 awarded in Feb-2020.

Certificate of appreciation by Tyco Qatar fire & security for outstanding HSE contribution and positive attitude towards near miss reporting awarded in Nov-2019.

Certificate of appreciation by Tyco Qatar fire & security for outstanding HSE contribution and positive attitude towards near miss reporting awarded in Oct 2019.

HSE certificate of appreciation by Qatar petroleum for outstanding HSE achievement Best safety observation (SOC) reported in 1st quarter 2017 awarded in Aug 2017.

Certificate of appreciation by Tyco Qatar fire & security for reporting Potential hazards / near miss incidents awarded in Dec 2015.

Certificate of Appreciation by Management of Hyundai Motor India Limited for identified the defective components awarded in Dec 2010.

OVERSEAS EXPERIENCE

Company : TYCO QATAR FIRE & SECURITY L.L.C on behalf of QATAR TEC W.L.L, (June 2015 to Present)

Client : Qatar Energy (Refinery)

Designation : Supervisor / Sr. Technician (Fire & gas)

JOB RESPONSIBILITIES

Leading a team to carry out different jobs under the maintenance contract which involves Preventive maintenance, fault finding and troubleshooting activities of Fire & Gas detections, fire protection in various Process & remote areas,

Ensure all fire and gas detectors activities are carried out in accordance with safe working practices and adhere to site safety regulations and practices.

Receiving work assignment from the fire & gas instrument team and either works alone or with team as required.

Prepare several kind of work permits Cold work permit, hot work permit, Confined Space Entry permits as per job requirement.

Responsible for requisition work order and repair or replacement of spare parts for specific works.

Performing inhibits procedures are isolations / de-isolation of F&G instruments safely and effectively.

Reviewing cause & effect diagrams, functional logic diagrams, loop drawing, Layout diagram and design package for modification for reliability improvements and the execution of plan as required.

Responsible for conducting daily pre-job safety toolbox talks, job hazard analysis and pre-confined space entry procedure before work begins.

Performing walkthrough test, site inspection, Loop test, functional logical test & ESD actual trip logical test as per approved (or) as-built Cause & Effect.

Performing & ensuring the safe and efficient operation for Planning and work Supervision of installation, Inspection, calibration, functional testing, troubleshooting of addressable & conventional fire alarm panels, smoke/heat detectors, flammable / toxic fixed gas detectors, flame detectors, Vesda smoke detection (HSSD) system, manual call points, Fire protection system of CO2 system, NOVEC system, Inergen system, Auto rim seal system, deluge and sprinkler water spray system as per requirement.

Responsible for fault finding, repairing of instruments, electronic & Pneumatic system, distinguishing the problems in deluge system and floating roof of auto rim seal system spare replacement of Nitrogen cylinders, pressure gauges, pressure switches, solenoid valves, pneumatic pilot actuator, manifold valves, and pressure control regulator such as all pneumatic and electronic fire & gas equipment testing and making adjustments in the field if required.

Performing periodically functionality test, sequence logic test, trip logic voting (1ooN, 2ooN) system and confirming the actual status in DCS panel as per as-built cause and effect.

Responsible for immediate repairs of false alarm, loop open/shorts, ground fault in the event of unplanned breakdown, Inspect, maintain and test all fire alarm equipment on site and replaces defective components as needed.

Responsible as a team leader during an Emergency and respond to on-call on a non-routine basis in after working hours, weekends / holidays.

Provide the job status of breakdown and critical maintenance activities reporting to client and project lead.

Ensure Calibration and testing the instruments using standard Calibration Gases measurement and testing equipment in line with project standards and procedures.

Preparing reports of preventive and corrective maintenance activities, daily, weekly and monthly work progress reports, instrument service, Calibration reports, functional test reports & spares used records as per client requirement.

Coordination with vendors, operation team, instrument team, fire control department for site acceptance testing of all fire alarm system, Flame detection system, gas detection system.,

Installation, maintain and repair the wide variety of fire and gas equipment installed throughout the operation area.

Responsible for inspection, walkthrough test, pre-commissioning loop checking, loop power up, Operation start-up and check all the conditions & making punch point as per client requirements.

Follow Safety management systems, leadership capabilities, Innovative, Adaptive and Optimist, Achievement of excellence in client management and service.

Performing other similar duties such as adherence to safety rules & regulations.

HAND ON EXPERIENCE FIRE AND GAS INSTRUMENTATION SYSTEM

Have worked in fire alarm Smoke detection system, LWHD, Gas detection Systems, Fire suppression system, extinguishing agent, Sprinklers water spray, Auto rim seal, Foam and Water deluge systems.

Installation, Calibration, Testing and troubleshooting of Combustible and toxic gas detectors in the various location in throughout plant. (Sieger, Honeywell, Det-tronics, General Monitor, Dragger, Detcon, Netsafety, Crowcon, Simtronics & MSA Ultima x-5000).

Troubleshooting & testing of the UV/IR Flame Detectors in transformer room, compressor shelter, LPG tank, pump house and chiller yard area. (General monitor, Fire sentry, dragger, Netsafety, Ominiguard, Det-tronics)

Troubleshooting & testing of Manual Call points, sounder, bell, Fire, Beacon. (MEDC, KAC, GENT, Autronica, Siemens)

Troubleshooting & testing of conversional & Addressable Fire Alarm Panels (TYCO, Minerva, Autronica, Honeywell, Auto pulse, Gent, C-Tec).

Troubleshooting & Testing of CO2 extinguishing System, kitchen hood system, INERGEN System, NOVEC system, fire extinguishing agent’s solenoid valves, directional valves and pressure switches.

Troubleshooting & Testing of HSSD Aspirating Smoke Detection systems.( VESDA, Stratos)

Calibration and Configuration using handheld Communicators, ABB and HART field communicator 475.

Troubleshooting & Testing of Deluge system, water sprinkler system, Auto rim seal Floating roof system and MOV (Motor operated valve) system in the location of pump station, LPG storage & Floating roof Tank area, compressor shelter, Pig Launcher & receiver area.

HSE TRAINING & COURSES

Permit to work (PTW) in Qatar Energy (Refinery & PDD) – QATAR

H2S & Breathing Apparatus in ENERTECH – QATAR

Authorized gas tester in ENERTECH – QATAR

Confined space entry in ENERTECH – QATAR

Fire Fighting Training Course in ATS – QATAR

Basic First Aid & CPR Course in Venture gulf – QATAR

Dragger Training (INSTROL) – QATAR

IOSH (Managing safely) in DISS – QATAR

WORK EXPERIENCE DETAILS IN INDIA

Company: LA BOTTLERS PVT LTD (PEPSI-CO), Trichy – (July 2013 to April 2015)

Designation: Technician (Maintenance & Operation)

Company: Tenneco automotive India Pvt ltd, Chennai – (Mar 2013 to July 2013)

Designation: Technician Trainee

Company: TVS Logistics Services Pvt Ltd, Chennai – (Oct 2012 – Mar 2013)

Designation: Trainee

Company: Hyundai Motor India Ltd, Chennai – (Sep 2010 – Sep 2012)

Designation: Diploma Trainee 1 & 2

Company: Hyundai Motor India Ltd, Chennai – (Aug 2009 – Sep 2010)

Designation: Diploma Apprentice

EDUCATION

Diploma in Electrical & Electronics engineering

The Salem Co-op Sugar Mills Polytechnic College

2007– 2009

COMPUTER SKILLS

Diploma in computer application, MS-Office packages (word, excel, PowerPoint).

Diploma in Electrical CAD.

Foundation Course on AutoCAD

PERSONAL DETAILS

Father Name : Periyasamy M

Nationality : Indian

Date of Birth : 26th April 1987

Gender : Male

Religion : Hindu

Marital Status : Married

Languages : English, Tamil

PERMANENT ADDRESS

No.2/348, Padayatchi Street,

Thandalaiputhur post, Musiri Taluk,

Tiruchirappalli District, Tamilnadu,

India – 621217

PRESENT ADDRESS

Building No – 20, Zone – 91, Street – 906

Ezdan – 36, Al Wukair, Doha, Qatar

PASSPORT DETAILS

Passport No : V5968411

Place of issue : Tiruchirappalli

Date of issue : 04.01.2022

Date of expiry : 03.01.2032

DECLARATION

I hereby declare that all the above furnished details are true to the best of my knowledge. If were placed in your esteemed concern I will discharge my duties with utmost sincerity and to

your full satisfaction.

Sincerely,

(P. Selvakumar)